1/2 TORX BIT T27 - 100MM"

1/2" Torx Bit T27 100mm

The 1/2" Torx Bit T27 100mm is built for exactly that: it seats fully in the head so nothing slips under load. The working detail: Torx T27, 100mm long, 1/2" drive.

Key Features

• Accurate Torx T27 form for full contact with the bolt head
• 1/2" square drive fits any standard 1/2" ratchet or bar
• 100mm length gives extra reach to clear covers, shrouds and recessed housings
• Torx fasteners are used throughout modern vehicles, from brake calipers to seat belt mounts and interior trim
• Made for the workshop rather than the occasional job

Applications

• General vehicle servicing and repair
• Fleet and commercial servicing
• Brake and suspension jobs

Specifications

• Drive: 1/2"
• Profile: Torx
• Size: T27
• Length: 100mm
• Part number: JBM 13566

Why Choose This Product?

Cheap tools round fasteners, and a rounded head turns a ten-minute job into an afternoon. The 1/2" Torx Bit T27 100mm seats fully in the head so nothing slips under load, and it keeps doing it long after the novelty wears off. Simple, dependable and ready whenever the job calls for it.

Frequently Asked Questions

Can I run it on a breaker bar?

Yes. With a 1/2" square drive it takes a ratchet, an extension or a breaker bar when a fastener needs more leverage.

Will it survive an impact gun?

It is not intended to. Hand sockets are made for steady turning force, so reach for an impact-rated version if you are working with an impact wrench.

How do I know T27 is the size I need?

T27 refers to the Torx profile size. Check the fastener head against the size you need before ordering, as neighbouring sizes look similar but will not seat properly.